Burnsville's odd-even lawn watering restrictions April 1 through Sept. 30.During watering restrictions, homes with even-numbered addresses may water their lawns before 11 a.m. or after 3 p.m. on even-numbered calendar dates. Homes with odd-numbered addresses may water their lawns before 11 a.m. or after 3 p.m. on odd-numbered calendar dates. Multi-family residences with multiple addresses, businesses with multiple addresses and structures without an apparent address may water before 11 a.m. or after 3 p.m. on odd numbered days.
Whenever there are thirty-one (31) days in a month, the thirty first day is a day both odd and even numbered properties can water before 11 a.m. or after 3 p.m.
Show All Answers
To ensure adequate water supply during hot summer months, the City of Burnsville has an odd-even day watering policy in place April 1 through Sept. 30 of each year. Mid-day watering is not efficient and results in large amounts of water being lost to evaporation. No lawn or garden sprinkling or other irrigation can take place between 11 a.m. to 3 p.m. on any day. This applies to all residential and commercial properties.
During watering restrictions, homes with even-numbered addresses may water their lawns before 11 a.m. or after 3 p.m. on even-numbered calendar dates. Homes with odd-numbered addresses may water their lawns before 11 a.m. or after 3 p.m. on odd-numbered calendar dates. Multi-family residences with multiple addresses, businesses with multiple addresses and structures without an apparent address may water before 11 a.m. or after 3 p.m. on odd numbered days.
If it has been determined that no blockage or restrictions exist within the City's sanitary sewer system, the homeowner is advised to contact a professional plumber or drain cleaning service to have the private sewer service inspected. The City Of Burnsville cannot make a recommendation for drain cleaning services. It may be in your best interest to obtain several estimates.Residents should be aware, if the problem is in the sewer service (lateral), the property owner is responsible for correcting the problem. The owner of the property is responsible for maintaining and cleaning the sewer lateral from the building to the City's sewer main, including the connection on the sewer main.
Many homeowners' insurance policies exclude damage resulting from sewer backups. However, some insurance companies do provide sewer backup coverage. If you are concerned about the possibility of a sewer backup and want to insure that you are covered, the City urges you to check with your home insurer regarding the availability of sewer backup insurance.
Grease: Cooking oil should be poured into a heat-resistant container and disposed of in the garbage after it cools, NOT down the drain. Washing grease down the drain with hot water is not the answer. This grease goes down the drain, cools off, and solidifies in the drain, the property owner's sewer and/or the sewer main. When this happens, the line eventually clogs.
Paper Products: Paper towels, disposable diapers, and feminine products cause a great deal of problems. These products do not deteriorate quickly. They become lodged in portions of sewer causing sewer backups. These products should be disposed of in the garbage.
Sewer Root Control: The continual flow of nutrient-filled water found in sewer pipes attracts tree roots. Roots growing along pipes exert significant pressure on pipes. These roots may push into and around gasket connection points, which may expand and break seals. Root infiltration can cause a blockage to the sewer, resulting in sewage backup in your home and damage to your property.
Tips For Controlling Roots: The conventional method of removing roots by a professional drain cleaning service involves cutting or tearing roots to solve an immediate problem. However, this method does not stop the growth or destroy the roots outside the pipe. This is similar to pruning the bushes and shrubs surrounding your residence.
An annual chemical root control program is an effective preventive maintenance measure. A product that foams with the addition of water is the most effective means of coating the roots and pipe surfaces. These products may be purchased from your local hardware store or home center.
Illegal Plumbing Connections: Do not connect French drains, sump pumps, roof gutter drains, or foundation drains to your sanitary sewer service. Not only is it illegal, debris and silt will clog your service line. Consult a plumber to correct any illegal connections.
Sanitary Sewer System:The City owns the sanitary sewer main in the street
Sanitary Sewer SystemOutside your home - The owner of the property owns and is responsible for maintenance and repair of the entire sanitary sewer service line including the connection at the City sewer main in the street.Inside your home – The sanitary sewer service is considered part of the home’s plumbing system and is the responsibility of the owner for maintenance, repair, and replacement.
Here are some troubleshooting suggestions: Bypass your water softener. Often times when softeners begin to fail they restrict the water flow to either low flow or no flow. If you bypass it and the flow is restored, you know it’s your softener. Here is a You Tube link to a tutorial on bypassing your water softener: https://www.youtube.com/watch?v=KvCOlHd9-yw. It goes over four different bypass types which should cover most softeners. Do you have a filtration system? If so, the filter may be plugged. Have you turned the water off at the meter because of plumbing repairs or equipment installation? Check both valves and make sure they are open all the way. If it is not one of the three above items, it is probably your Pressure Reducing/Regulating Valve (PRV). It can fail and cause high water pressure, low water pressure, or no water at all. Replacement is part of the plumbing system which is owned by the homeowner. Please go to the City of Burnsville website to download a copy of the meter and valve information brochure. If you are handy, they are easy to replace. If not, you may want to have a plumber make the repair for you.
High Water PressureYou can purchase a pressure gauge at a home improvement store to get the pressure in your home.
If you have a laundry tub with threads on the faucet, you can attach the gauge there and turn the water on to get the pressure. Otherwise, you can attach the gauge to one of your outside hose bibs and turn the water on.
If the pressure is high (over 75 psi), your PRV may need adjustment or replacement. The PRV is bell shaped with a screw in the top and is mounted near the water meter. There is a nut which needs to be loosened to do the adjustment and tightened again when you are done.
Adjusting a PRV – To DECREASE the water pressure, turn the screw to the left in very small increments. A little does a lot. To INCREASE the water pressure, turn the screw to the right in very small increments. A little does a lot.
Check your pressure gauge as you turn the screw and turn it until you reach your desired pressure. The recommend pressure is 50 -70 psi. If turning the screw does not adjust the pressure, you need to replace the PRV.
Adjusting your PRV Video - link belowThe installation will look different in your home because this video is done in a factory test lab. Your PRV should be before your water meter and in some installations, after the water meter. Adjusting your PRV video
Please call 952-895-4552 to discuss issues you are having with your water quality to see if you would be a good candidate for a water test.
If you would like other things tested you would have to contact a water analysis lab and pay for those tests results.
Check all toilets for leaksEven if you don’t hear water running, it does not mean the toilet isn’t leaking. One way to check if there is a leak between the bowl and the tank is to place a few drops of food coloring into the tank; then, wait several minutes to see if the dye enters the bowl. If it does, you have a leak.
Check faucets and shower heads for leaks.
Check proper operation of water softener to make sure it isn’t running too often, or it isn’t running continuously.
Check your meter reading If you have a water softener or an irrigation system, make sure neither system is set to run that night and read the meter before you go to bed. The next morning before any water is used inside or outside, read the meter again. If the reading increased, you have a leak.
Do a five gallon bucket testRead the meter, then fill a five gallon bucket. After filling the 5 gallon bucket, read the meter again. If it moves five gallons, the meter is reading accurately.